CURRENT NEWS RELATING TO F.BRITSCH

Advantages: WAVE Slits prevent from getting chips into the guiding bore Extended guiding up to 40mm depending on guide bush type ULTRA PRECISE High scratch-free surface on the turning parts Very low coefficient of friction, thus ensuring very good sliding properties Very good for Material with worse sliding properties like TITANIUM Shape consistency and stability is guaranteed by this Alloy Concentricity accuracy is the same as what the user is used to by a guide bush This Alloy is not heat sensitive and non-abrasive Prevents cold shut and friction between Material and guide bush The Flyer of this Product you can find here. You can order this tool by mail, by phone or directly in our Online Shop.  

PCD-tipped inserts guarantee higher cutting performance Improvement of the surface quality Better tool lifetime Increase in productivity Advantages: Production of profiles with one operation Cutting edge quality lasered, ground or eroded – according to your needs Chip grooves possible             Please find the flyer for this product here. We would be happy if you  contact us and ask for a free offer.

The Circular plate in the sizes D60 / D80 and D100 are perfect to keep the high surface quality of your turned parts. With changeable Wood- or POM Plate available. Available with exchangeable wooden or POM plate Standard cut-out 80mm. Wide and position can be modified to customer requirement Cycle time adjustable, can be also used in continuous operation. Stepless rotation speed from 0 – 50 RPM Stepless height-adjustable from 650 – 1000 mm with 4 mounted rollers with locking brake Oil feedback into the machine ensured   The Flyer of this product you can find here. here. Please feel free to  contact us and ask for a free offer.

Advantages: Predefined force for tightening the nut (repeatability) Reduced risk of runout problems by using too much strength Reduced risk of damaging nuts and tool holders Reduced risk of injuries   We can also supply you with each ER-Nuts and ER-Collets!       You can order this tool by mail, by phone or directly in our Online Shop.   Further types of wrenches are also available!  

The STC250M Manual bar chamfer model offers a solution to enable maximum bar size to be run by any machine by turning the outside diameter down to suit a smaller gripper collet to allow automatic bar change and remnant extraction. This model includes as standard a turn and chamfer tool, precision 3-jaw chuck, variable spindle speed controller, quick change cutter head assembly for bespoke tooling and a bar support stand. The STC250S Semi Automatic bar chamfer model is a medium volume, compact and portable production machine, for chamfering and ending mass-produced parts at high speed. For chamfering, over turning and chamfering and stud rod chamfering, the STC250S delivers a cycle time as low as 20 seconds per operation. The machine features an automatically driven 3-jaw chuck and we can provide bespoke tooling to cater for any special application. The fast and reliable adjustable high pressure hydraulic clamping system ensures precise gripping on all materials including plastic. Please feel free to contact us and ask for a free offer.

Quick change modular tool system, without having to remove the tool-holder from the gang Presetting is possible outside of the machine Ultra precise fitting, rigid fixation Tool-holder in various sections and with round shank available Also available for STAR backworking Left and right inserts in various versions available             The flyer of this product you can find here. You can order this tool by mail, by phone or directly in our Online Shop. 

Ergonomic key handle, extremely handy due to compact design. Especially for difficult to access screws, narrow places and tightest engineering spaces. Click signal when the set torque value is reached. Compatible with all 28369 series blades According to standard EN ISO 6789, BS EN 26789, ASME B107.14M. +/- 6%, traceable to national standards Opening torque approx. +30% above tightening torque Supplied with practical plastic box incl. factory test report.           The flyer of this product you can find here. You can order this tool by mail, by phone or directly in our Online Shop.

Tool systems with internal cooling have been gaining ground for several years now and make modern metalworking even more efficient. In order to transport the lubricant through the narrow bore holes directly to the cutting edge, the use of high-pressure pumps and distribution systems is necessary. The screw connections on these distributors within the machine are often located in very confined spaces. Small and permanently installed copper pipes transport the lubricant to the tool holder. In order to change the tool or the cutting insert, the tool holder used to have to be laboriously removed from the distribution system. With the HEB MiniPlug system, a high pressure quick coupling system is now available for small lathes and helps to reduce machine downtime during tool change to a minimum. Advantages: Suitable up to 200 bar Made of stainless steel High-quality flexible braid hoses Contains different thread adaptors suitable distribution blocks and system accessories           Example of use on Star SR20R Mainspindle       Example of use on Star SR20R backside   You can order this tool by mail, by phone or directly in our Online Shop.

High-pressure cooling along the longitudinal axis, directly on the cutting edge of the insert, gives you a significantly better surface finish and considerably longer tool life. Available for ISO DC…07/11, VC…11, 800line, 040line and OXO-Line inserts.     The flyer of this product you can find here. You can order this tool by mail, by phone or directly in our Online-Shop.